Monk Makes is known for its useful electronic kits and modules.

We mostly sell out products on Amazon and through our network of resellers, but if you want to buy in bulk, or are interested in becoming a reseller then please email linda@monkmakes.com.

Here is a list of our products, click on a product to visit the product page that will provide more information about the product including: where to buy it, FAQs, documentation, tutorials and community discussions.

BBC micro:bit

Speaker for micro:bit

The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to the micro:bit using alligator clips. Despite its small size, the speaker is pretty loud.

Please note that the individual boards are packed in antistatic bubblewrap bags.
Product Information


Relay for micro:bit

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off.

This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting. The voltage needs to be kept under 16V, but the relay will automatically protect itself against too much current.

Please note that the individual boards are packed in antistatic bubblewrap bags.

Product Information


Sensor for micro:bit

The MonkMakes Sensor Board for micro:bit can be used to measure sound levels, temperature and light levels.

Please note that the individual boards are packed in antistatic bubblewrap bags.
Product Information


Electronic Starter Kit for micro:bit

This kit contains everything needed to start learning about connecting electronics to the micro:bit in an accessible and easy manner. Everything is connected using the supplied alligator clips, so no soldering required. This kit suitable for children as young as 10 with some adult help.

Product Information


RGB LED for micro:bit

The MonkMakes RGB LED is an LED that can be used to make any colour. Handily mounted on a PCB it connects to the micro:bit using alligator clips.

Please note that the individual boards are packed in antistatic bubblewrap bags.
Product Information


Alligator Leads – pk 10, 15cm (approx)

Perfect for micro:bit, our leads are supplied in a bundle of 10. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to tip.
Product Information


7-segment board for micro:bit

The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit.

Powered directly from micro:bit pins it can be used to send messages to the display using the micro:bit’s Serial blocks.

Please note that the individual boards are packed in antistatic bubblewrap bags.
Product Information


MonkMakes CO2 Sensor for micro:bit

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit.
Product Information


Power for micro:bit

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit.
Product Information


Servo for micro:bit

Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit.
Product Information


Servo Kit for micro:bit

The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and batteries and away you go!
Product Information


Raspberry Pi

Electronics Starter Kit for Raspberry Pi

The Raspberry Pi Electronic Starter Kit contains all the components needed, together with easy to follow instruction cards, in order to complete 10 simple experiments involving LEDs, thermistors, photoresistors and switches and is an ideal starting point for anyone new to electronics and the Raspberry Pi.

Product Information


Squid Twin Pack

Pack of two Raspberry Squids – A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi. This product includes a Raspberry Leaf GPIO Identification template.
Product Information


Squid Individual

A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

Please note individual Squids are packaged in a clear plastic bag.
Product Information


Squid Button Twin Pack

The Button Twin Pack consists of two Raspberry Squid Buttons (non-latching) and a Raspberry Leaf GPIO template.

Product Information


Squid Button non-latching Individual

The Squid Button is a momentary action push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Particle Photon. To reduce the chance of accidental short-circuits when using the Button, each Button has a built-in 470Ω resistor that does not affect the switching action when connected to a GPIO input, but does mean that if the switch is accidentally connected across power connections your Raspberry Pi will not come to any harm.

Please note individual Squids are packaged in a clear plastic bag.
Product Information


Squid Button LATCHING Individual

The Squid Button LATCHING is a latching (click-on, click again off) push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Particle Photon. To reduce the chance of accidental short-circuits when using the Button, each Button has a built-in 470Ω resistor that does not affect the switching action when connected to a GPIO input, but does mean that if the switch is accidentally connected across power connections your Raspberry Pi will not come to any harm.

Product Information


Squid Combo Kit

The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons (non-latching) and a Raspberry leaf to help identify the GPIO pins.

A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

Product Information


Servo Kit for Raspberry Pi

This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi.

Product Information


Puppet kit for Raspberry Pi

Contains everything needed to make a puppet with a Raspberry Pi using a Monkmakes ServoSix board
Product Information


Clever Card Kit for Raspberry Pi

The MonkMakes Clever Card Kit for Raspberry Pi provides hours of entertainment building projects that can read and write from 13.5MHz contactless RFID smart cards.

Product Information


ServoSix (Board Only)

The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino.
Product Information


Raspberry Leaf Classroom Pack (20)

The Raspberry Leaf GPIO template is a great way of identifying the GPIO pins on your Raspberry Pi. This classroom pack contains 20 Raspberry Leaf GPIO templates.
Product Information


General Electronics

Electronic Starter Kit for BeagleBone Black

Solderless electronic experiment kit designed to accompany the book Programming BeagleBone Black by Simon Monk. (Beagle Bone and Book NOT included)

Product Information


Basic Component Kit

This little box of bits from MonkMakes is a collection of the most used components from Simon Monk’s books. This kit provides you with a good selection of the most useful components.

Product Information


Monk Makes Protoboard Kit

Go from solderless breadboard design to a neat soldered solution that works with connectors that don’t play well with breadboard using the MonkMakes Protoboard kit.

Product Information


Monk Makes Protoboard 5 Pack

After its successful KickStarter Campaign the MonkMakes Protoboard is now available to buy as a 5-pack of boards

Product Information


Monk Makes Protoboard Component Pack

This is a twin pack of side components for the MonkMakes Protoboard. It includes relays, components for a 5V power supply and connectors. Packaged in small cardboard box.
Product Information


MonkMakesDuino LCD Kit

The MonkMakesDuino LCD Kit provides plenty of entertainment building projects and learning how to program and use the MonkMakesDuino Arduino-compatible board.

Product Information


MonkMakesDuino (Single)

This is an Arduino Uno compatible board designed for ease of use with breadboard
Product Information


Hacking Electronics Kit

This kit of parts is designed to help to get started with electronics. It is a useful general purpose starter kit but was originally designed to accompany the book Hacking Electronics: An Illustrated DIY Guide for Makers and Hobbyists by Simon Monk.

Product Information


Hacking Electronics Mega Kit

To accompany the release of the second edition of Simon’s book ‘Hacking Electronics’ in October 2017 the original Hacking Electronics Starter Kit has been extended to produce the Hacking Electronics Mega Kit.

It provides a good set of components to make many of the projects in the book, as well as providing a great basic kit of parts to get started on an electronics adventure.

Product Information


Breakout boards for TEA5767 – 3 pk

The TEA5767 Breakout makes it possible to use TEA5767 FM radio receiver modules on breadboard. The TEA5767 module (not included) would need to be soldered onto the PCB

Note that these are sold in a pack of three breakout PCBs.

Product Information


Coming Soon

RaspiRobotBoard 4

Available from December 2018.

A motor controller board for the Raspberry Pi. This board can control two DC motors and also powers your Raspberry Pi from a 4 or 6 AA battery pack. There are connectors for a rangefinder, two servos, and I2C devices.

Watch out for an updated version of our Robot Rover Kit using this board.

Product Information